AUDIO-TECHNICA TURNTABLE

Audio Technica - AT-LPW40WN Turntable

Audio-Technica

$899.00
Only 1 left!
or 6 weekly interest-free payments of $149.83 Laybuy What's this?


AVAILABLE ONLINE
Not currently in-store. Usually ships within 2-3 business days.

FREE shipping in NZ, Australian orders over $99, International orders over $199

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Product Features

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPMMotor features a speed-sensor system to maintain accurate platter rotation speed
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminium platter with rubber matAT-HS4 universal ½”-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
  • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Product Specs

Type 2-speed, fully manual operation
Motor DC servo motor w/speed stability control
Drive Method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Wow and Flutter 0.15% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio >60dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
Power Supply Requirements 100-240V AC, 60 Hz
Power Consumption 1 W
Dimensions 420.0mm W x 340.0mm D x 116.9mm H
Weight 4.7kg
Accessories Included AT-VM95E phono cartridge; AT-HS4 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; rubber mat; dust cover; 45 RPM adapter
Tonearm type Balanced straight tonearm with detachable headshell
Effective arm length 223.6mm
Overhang 18.6mm
Tracking error angle <2 degrees
Applicable cartridge weight 12-17g
Anti-skating range 0-3g
Replacement Stylus AT-VMN95E

IMPORTANT NOTE:We currently only ship turntables within NZ - if you wish to make an overseas order please contact us direct and we will see how we can assist.

Shipping within in NZ is free and the turntables come pre-packed for shipment.

We do not ship these to P.O. boxes - physical address' only please.